- Call +61 8 9356 7633
%20RGB.svg?updated=1725256208){kind=logo}
If you have employees moving between dusty work areas to clean-zones, the installation of a JetBlack Safety Standard Personnel Cleaning Booth will allow them to quickly and safely remove residue dust, powder or contaminant from all PPE and work-wear clothing. JetBlack Safety Personnel Cleaning Booths are self-contained de-dusting systems which are guaranteed to meet or exceed OHS requirements.
JetBlack Safety Personnel Cleaning Booths are electric and use no compressed air – contaminated workers can continuously enter and exit the unit without having to wait for a compressor tank to re-fill. It is a completely safe alternative to using compressed air (see Dangers of Using Compressed Air) and is much easier to use than alternative vacuum systems. It operates by utilising high-velocity, low-pressure air, which is effective in dislodging powders, dust and fibres effectively and safely from clothing and skin, even when directed at exposed skin. All dust and fibres are drawn down and away through the floor by an extractor system and collected either in a HEPA extractor or vented directly into your existing exhaust system.
The booth come standard with twin doors, but workers can enter and exit out the same door if preferred. Walk-through booths can be conveniently situated at entry/exit points.
Safe - Easy to operate and maintain
Powerful - Blower-driven air (DOES NOT use compressed air) for an ‘air shower’ effect
Tough - Modular construction
Single phase power - the booth is electric, and can be plugged in to start use immediately with a single phase power supply. 3-Phase power supply is also available.
Extractor options - Includes stand-alone extractor but can be purchased as individual unit with extractor fan to connect directly into an existing exhaust system
Indoor/Outdoor options - Suitable for indoor or outdoor use (rain covers optional)
Mining above and below ground, mineral processing facilities, construction sites, power stations, clean-room manufacturing facilities, quarrying/stone/aggregate facilities, plastic and rubber production, cement and plasterboard manufacturing, paper and tissue production, carpet and general textile manufacturing, fibre moulding, anywhere that has dust and other airborne solids.
Please note: at this stage, hazardous zone environments cannot be serviced.
External roof cover kit
Footbrush
If you have employees moving between dusty work areas to clean-zones, the installation of a JetBlack Safety Standard Personnel Cleaning Booth will allow them to quickly and safely remove residue dust, powder or contaminant from all PPE and work-wear clothing. JetBlack Safety Personnel Cleaning Booths are self-contained de-dusting systems which are guaranteed to meet or exceed OHS requirements.
JetBlack Safety Personnel Cleaning Booths are electric and use no compressed air – contaminated workers can continuously enter and exit the unit without having to wait for a compressor tank to re-fill. It is a completely safe alternative to using compressed air (see Dangers of Using Compressed Air) and is much easier to use than alternative vacuum systems. It operates by utilising high-velocity, low-pressure air, which is effective in dislodging powders, dust and fibres effectively and safely from clothing and skin, even when directed at exposed skin. All dust and fibres are drawn down and away through the floor by an extractor system and collected either in a HEPA extractor or vented directly into your existing exhaust system.
The booth come standard with twin doors, but workers can enter and exit out the same door if preferred. Walk-through booths can be conveniently situated at entry/exit points.
Safe - Easy to operate and maintain
Powerful - Blower-driven air (DOES NOT use compressed air) for an ‘air shower’ effect
Tough - Modular construction
Single phase power - the booth is electric, and can be plugged in to start use immediately with a single phase power supply. 3-Phase power supply is also available.
Extractor options - Includes stand-alone extractor but can be purchased as individual unit with extractor fan to connect directly into an existing exhaust system
Indoor/Outdoor options - Suitable for indoor or outdoor use (rain covers optional)
| Motor Power | 1.5kW |
| Power Supply (V/Phase/Hz) | 240/1/50 | 415/3/50 |
| Extraction Flow Rate | 1600m3/h |
| Filter | The extractor features a fabric pre-filter bag which is G4 rated. This protects the HEPA H14 filter ensuring longer lasting life and minimum maintenance.
|
Mining above and below ground, mineral processing facilities, construction sites, power stations, clean-room manufacturing facilities, quarrying/stone/aggregate facilities, plastic and rubber production, cement and plasterboard manufacturing, paper and tissue production, carpet and general textile manufacturing, fibre moulding, anywhere that has dust and other airborne solids.
Please note: at this stage, hazardous zone environments cannot be serviced.
