‘Out of the box’ drying solution, specifically designed to surface dry aluminium cans – whether drying for date coding or packaging
A single slot can dryer mounted on top of the conveyor to dry lids or bottoms
Using a small 5.5kW centrifugal, radial bladed blower, this air knife drying system is suitable for line speeds lower than 6,000 cans per hour and is designed to be easily installed, operated and maintained.
Capable of drying can sizes 330-568ml, providing a water removal efficiency figure of 96.5%, and are backed up with a 24 month warranty.
Noise levels are 87 dB(A) with the polyethylene spray cover and 90 dB(A) without. An additional acoustic enclosure is available for the blower, if required.
More cost effective - in operation running costs reduced by as much as 90%.
Quieter – lower air pressures used reduces the expansion ratio and turbulence of the air produced.
Cleaner – blower-driven air is both dry and oil free. No expensive additional filtration required.
Safer – centrifugal blowers operate on the principle of high velocity, low pressure air which presents no danger to
Additional AK05 aluminium anodised air knives 300mm long (2x) to dry the can sides
ACI/EV APE711 (5.5kW) centrifugal blower,
Stainless steel 'Y' slot drying plenum chamber
Clamping kits
Polyethelene mounting plates
Flexible ducting
Jubilee clips
Acoustic enclosure