Products : Booths : JetBlack Safety Manual Personnel Cleaning Booth 3-Phase BH02-C-3

JetBlack Safety Manual Personnel Cleaning Booth 3-Phase BH02-C-3

SKU: BH02-C-3+JS-606-C-3-50
JetBlack Safety personnel cleaning booth with extractor C-range (2025)
A self-contained, semi-automatic, de-dusting system that removes, extracts and collects dust and debris from employees' dirty work clothes.

JetBlack Safety Manual Personnel Cleaning Booth 3-Phase BH02-C-3

SKU: BH02-C-3+JS-606-C-3-50
Three phase, manual booth for worker de-dusting and clothes cleaning - hand-held hose only

Key features

Manual air delivery system via an ergonomic nozzle (with 1.5m hose) for effective manual spot cleaning.

Larger 3kW motor 

Three-phase fan design delivers a higher volume air shower at a rate of 1850m3/h

Two doors for walk-through functionality

Single phase power supply is also available (see BH02-C-1 + JS-606-C-1-50)

Manufacturer / Supplier

JetBlack Safety
Dynamic Engineering Australia - The Ventalation System Experts
We don't just sell products. 
We engineer solutions using quality products
to best suit your application. 

We are the Ventilation System Experts.


If you have employees moving between dusty work areas to clean-zones, the installation of a JetBlack Safety Manual Personnel Cleaning Booth will allow them to quickly and safely remove residue dust, powder or contaminant from all PPE and work-wear clothing. JetBlack Safety Personnel Cleaning Booths are self-contained, semi-automatic, de-dusting systems which are guaranteed to meet or exceed OHS requirements. 

JetBlack Safety Personnel Cleaning Booths are electric and use no compressed air – contaminated workers can continuously enter and exit the unit without having to wait for a compressor tank to re-fill. It is a completely safe alternative to using compressed air (see Dangers of Using Compressed Air) and is much easier to use than alternative vacuum systems. It operates by utilising high-velocity, low-pressure air, which is effective in dislodging powders, dust and fibres effectively and safely from clothing and skin, even when directed at exposed skin. All dust and fibres are drawn down and away through the floor by an extractor system and collected either in a HEPA extractor or vented directly into your existing exhaust system. 

The booth come standard with twin doors, but workers can enter and exit out the same door if preferred. Walk-through booths can be conveniently situated at entry/exit points.

Safe -  Easy to operate and maintain 

Powerful - Blower-driven air (DOES NOT use compressed air) 

Tough -  Modular construction 

Three-phase power - Provides enhanced performance and efficiency as well as distributing the electrical load more effectively. Single phase power supply is also available (see BH02-C-1 + JS-606-C-1-50).

Internal or external use - Rain cover available

COMPARING THE SINGLE-PHASE BOOTH WITH THE THREE-PHASE BOOTH

Single-Phase Booth

3-Phase Booth
Motor power: 1.5kWMotor power: 3kW
230V, 50Hz as standard400V, 50Hz as standard
1500m3/hr air flow performance1850m3/hr air flow performance
(10 air changes / min)(12 air changes/min)
Noise level 84.2dB(A)@ 1mNoise level 84.2dB(A)@ 1m


Typical environment

Mining above and below ground, mineral processing facilities, construction sites, power stations, clean-room manufacturing facilities, quarrying/stone/aggregate facilities, plastic and rubber production, cement and plasterboard manufacturing, paper and tissue production, carpet and general textile manufacturing, fibre moulding, anywhere that has dust and other airborne solids. 

Perfect for high performance industrial settings requiring consistent and reliable operations.

Please note: at this stage, hazardous zone environments cannot be serviced.

Inclusions

  • Cleaning booth with filters
  • Standalone extractor with pre-filter and HEPA filter
  • PLC control system
  • Internal lighting and controls

Accessories

Optional

External roof cover kit

Footbrush

Replacement parts

Moulded nozzle assembly | Flexible hose assembly  | External roof cover kit | HEPA filter for booth extractor | Pocket pre-filter for booth extractor | Puck filters (single or packs of six) | HEPA puck filters (single or packs of six) | Roof filter for booth

Technical details

Motor Power 3kW
Power Supply (V/Phase/Hz) 415/3/50
Extraction Flow Rate 1850m3/h
Filter The extractor features a fabric pocket pre-filter which is F9 rated. This protects the HEPA H14 filter ensuring longer lasting life and minimum maintenance.
Noise 84 dBa
Air Change 12 /min

Typical environment

Mining above and below ground, mineral processing facilities, construction sites, power stations, clean-room manufacturing facilities, quarrying/stone/aggregate facilities, plastic and rubber production, cement and plasterboard manufacturing, paper and tissue production, carpet and general textile manufacturing, fibre moulding, anywhere that has dust and other airborne solids. 

Perfect for high performance industrial settings requiring consistent and reliable operations.

Please note: at this stage, hazardous zone environments cannot be serviced.

Manufacturer / Supplier

JetBlack Safety

Packaging

Weight: 700kg
Length: 1970mm
Width: 1370mm
Height: 2440mm